Blar i Master's theses (RealTek) på tittel
Viser treff 284-303 av 1724
-
Daily temperature and precipitation variability in Scandinavia in a large ensemble simulation
(Master thesis, 2019)According to the last assessment report from the Intergovernmental Panel on Climate Change, due to human-induced climate changes, alterations in future temperature and precipitation are expected, and we will have a higher ... -
Data fra ulike innsamlingsplattformer i bratte fjellområder og deres egnethet til deteksjon av ras
(Master thesis, 2022)I Norge er det varierende terreng med tidvis bratte fjellpartier. For å kunne dokumentere mulige skred- eller rashendelser er det behov for god, innsamlet informasjon om områdene. I vårt tilfelle ser vi nærmere på Trollstigen, ... -
Data-driven approach to reduce electricity cost in chocolate production
(Master thesis, 2020)In order to ensure sustainable food manufacturing, it is vital to improve the energy efficiency of production plants continuously. Identifying and conducting energy-saving measures and projects are essential in this process, ... -
Deep learning for automatic delineation of tumours from PET/CT images
(Master thesis, 2019)Purpose: The delineation of tumours and malignant lymph nodes in medical images is an essential part of radiotherapy. However, it is both time-consuming and prone to inter-observer variability. Automating this process is ... -
Deep learning for automatic tumor delineation of anal cancer based on MRI, PET and CT images
(Master thesis, 2019)Presis inntegning av tumorer ansees som det svakeste leddet og den største kilden til usikkerhet ved planlegging av strålebehandling. Formålet med denne avhandlingen er å utforske mulighetene for automatisk inntegning av ... -
Deep neural networks for object detection in agricultural robotics
(Master thesis, 2017)Robotization of tasks in the agricultural domain has the potential to transform food production through continuous surveillance of crops which can facilitate precise admin- istration of nutrients, fertilizers and treatments ... -
Deep reinforcement learning for vehicle-to-grid control of long-term parked EVs : a case study of Oslo airport Gardermoen
(Master thesis, 2022)There is a growing demand for electricity that leads to costly expansions of the grid capacity having to be made. Additionally this increase in demand also leads to the introduction of unregulated energy resources that ... -
Defect related radiative recombination in mono-like crystalline silicon wafers
(Master thesis, 2016-08-31)The aim of this work was to investigate defect related luminescence emission in four mono-like silicon wafers. The seed-assisted silicon ingot is built by six Czochralski silicon slabs, with nine seed junctions. The ... -
Deformerbare elastiske ringer for Gripper
(Master thesis, 2013-08-29)Denne rapporten tar utgangspunkt i en ide som ble presentert for meg av Vector Technology Group AS. Grunnlaget for ideen var å utvikle et produkt som ville bli brukt til å fortøye lastskip etc ved hjelp av ringer som skal ... -
Dekkslitasjepartikler fra motorsportbaner : en første kartlegging og mulige tiltak
(Master thesis, 2021)Dekkslitasjepartikler (TWP) har i løpet av de siste årene fått mer oppmerksomhet, og regnes i dag som den største kilden til utslipp av mikroplast til miljøet. Til tross for dette så er det fortsatt stor mangel på ... -
Demonterbar løfteramme for offshoreoperasjoner
(Master thesis, 2015-08-06)I forbindelse med offshore løfteoperasjoner er det i noen tilfeller ønske om delbare løfteredskaper. IMT ved NMBU ønsker å styrke sin kunnskap om slike løfterammer og har derfor initiert denne oppgaven. Masteroppgaven ... -
Den moderne eplehagen
(Master thesis, 2017)Med dagens befolkningsvekst øker behovet for flere boliger. Det stilles høye krav til fortettingspolitikken for å oppnå en bærekraftig byutvikling. Det oppfordres til å fortette nær kollektivknutepunkt og innenfor eksisterende ... -
Den private byggherrens valg av entrepriseform
(Master thesis, 2014-09-15)Eiendom-, bygg- og anleggsbransjen utgjør en ikke ubetydelig del av Norges økonomi, ansvarlig for om lag 8 % av Norges bruttonasjonalprodukt. Både offentlige og private aktører opererer innen byggebransjen. Sistnevnte, ... -
Description and analysis of a resonating free-piston tubular permanent magnet linear machine, suitable for exploring the effects of increasing frequency in hammer drilling
(Master thesis, 2011-10-07)A resonating tubular free-piston synchronous permanent magnet linear machine with gas springs, known as “prototype 2B”, has been designed in collaboration with Resonator AS. This combination of an electric linear machine ... -
Design and analysis of a tension- leg-buoy floating wind turbine
(Master thesis, 2022)In 2016, Anders Myhr published an optimized model of the TLB design, made significantly more cost efficient than other floating offshore wind turbine configurations. This model was called the TLB B2 and was designed for ... -
Design and control of a loader mechanism for the NMBU agricultural robot
(Master thesis, 2017)Despite the development of new technologies, manual labour still continuous to play a large role within most modern agricultural operations, especially during harvest. Consequently, there is an increasing demand for new ... -
Design and development of a low-temperature reactor system for biorefining waste oil
(Master thesis, 2017)The background for this master’s thesis is the focus on bioenergy and biofuels at NMBU. This has, among others, resulted in a prototype of a small-scale biorefinery, which uses methanol and waste cooking oil to produce ... -
Design and simulation of a grid-conneted PV system in South Africa : technical, commercial and economical aspects
(Master thesis, 2018)The purpose of this thesis is to evaluate the potential and economic feasibility of installing a grid-connected photovoltaic (PV) system at Panthera Africa, located in Overstrand municipality in South Africa. Panthera ... -
Design av ankerliner for flytende vindturbiner i mellomdypt vann ved hjelp av optimering
(Master thesis, 2018)Som resultat av økt fokus på bærekraftige løsninger blir insentiver for innovasjon viktig. Flytende vindturbiner har et stort potensial for å bidra til reduksjon av \ce{CO2}-utslipp. Kostnadene for flytende vindturbiner ... -
Design av prosesslinje for håndtering og sortering av sagflis til bruk i sponplateproduksjon
(Master thesis, 2011-10-07)