Show simple item record

dc.contributor.authorRauert, Cassandra
dc.contributor.authorRødland, Elisabeth S
dc.contributor.authorOkoffo, Elvis D.
dc.contributor.authorReid, Malcolm J
dc.contributor.authorMeland, Sondre
dc.contributor.authorThomas, Kevin V
dc.date.accessioned2021-08-26T08:57:25Z
dc.date.available2021-08-26T08:57:25Z
dc.date.created2021-03-10T16:23:26Z
dc.date.issued2021
dc.identifier.citationEnvironmental Science and Technology Letters (ES&T Letters). 2021, 8 (3), 231-236.en_US
dc.identifier.issn2328-8930
dc.identifier.urihttps://hdl.handle.net/11250/2771337
dc.description.abstractEnvironmental monitoring data for tire road wear particles are vastly limited compared to those for other microplastics, primarily due to analytical challenges with quantification. Recently, two ISO technical specifications have been released using pyrolysis GC-MS for quantification. However, these methods have major assumptions, including that the content of natural and synthetic rubber in tire tread is constant across formulations and that the pyrolysis products chosen are selective. This study analyzed a wide range of commercially available tires from Australia and Norway, using pyrolysis GC-MS to test these assumptions. The percent mass of synthetic rubber in tires (n = 39) was highly variable, ranging from <0.05 to 28%, when using the ISO-recommended pyrolysis product 4-vinylcyclohexene. The content varied between brands and models, demonstrating that formulations are highly variable and unknown. The styrene butadiene dimer and trimer pyrolysis products were also assessed, and the calculated synthetic rubber content was higher, had an even greater variability, and had no correlation with concentrations calculated using 4-vinylcyclohexene. Using the ISO method has the potential to underreport environmental concentrations of TRWPs by a factor of at least 5, suggesting the specification requires further refinement, and there is an immediate need for large-scale analysis of commercial tire treads and assessments of suitable pyrolysis products.
dc.language.isoengen_US
dc.titleChallenges with Quantifying Tire Road Wear Particles: Recognizing the Need for Further Refinement of the ISO Technical Specificationen_US
dc.typePeer revieweden_US
dc.typeJournal articleen_US
dc.description.versionacceptedVersion
dc.source.pagenumber231-236en_US
dc.source.volume8en_US
dc.source.journalEnvironmental Science and Technology Letters (ES&T Letters)en_US
dc.source.issue3en_US
dc.identifier.doi10.1021/acs.estlett.0c00949
dc.identifier.cristin1897073
dc.relation.projectNorges forskningsråd: 160016
cristin.ispublishedtrue
cristin.fulltextpostprint
cristin.qualitycode1


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record