Browsing Faculty of Science and Technology (RealTek) by Title
Now showing items 346-365 of 1843
-
Developing a robotic thumb with limited backdrivability
(Master thesis, 2018)The goal set in this thesis was to develop a robotic thumb with at least one backdrivable joint with a 15 N minimum grip strength, all within a human hands’ size constraints. Backdrivability is the mechanical principle of ... -
Developing an In-Vitro dynamic model of the stomach and small intestine for milk products : first prototype
(Master thesis, 2015-02-25)The aim of this study has been to design and develop the first prototype, of a dynamic in-vitro model of the digestive system through the stomach and the small intestine. This has been part of a project initiated by a group ... -
Developing an in-vitro dynamic model of the stomach and small intestine for milk products : second prototype
(Master thesis, 2015-07-30)This thesis is written as part of a project lead by researchers at NMBU who wishes to replicate the physical processes of the digestion system in a human body (in-vivo). To replicate such a system is beneficial for ... -
Developing models for winter processes in grasslands – Bayesian calibration and sensitivity analysis
(PhD Thesis;2010:9, Doctoral thesis, 2010)For grass-based agriculture at high latitudes, poor overwintering of perennial forage grasses often has economic consequences due to yield loss and re-establishment of grass fields. In order to assess the performance of ... -
Developing offshore floating wind turbines : the Tension-Leg-Buoy design
(PhD Thesis;2016:22, Doctoral thesis, 2016-04-07)A 5 MW Tension-Leg-Buoy (TLB) concept has been optimized and developed. The design is based on the MIT Double Taut Leg, initially proposed by Professor Sclavounos of MIT in 2005. Six variants have been tested, in two wave ... -
Development and evaluation of a chair design made out of recycled paper from Ethiopia
(Master thesis, 2018)This master thesis is a part of Penda Manufacturing PLC project to look into alternative uses for recycled paper in addition to the production of pulp and one of these alternatives is the use of recycled paper in furniture ... -
Development and structural analysis of a multirotor support structure
(Master thesis, 2021)Continuous advancement in wind turbine technology is a key factor in driving down the cost of energy from wind power. One idea that has been evaluated is the concept of having multiple rotors on a single support structure. ... -
Development and verification of methods for the rheological characterization of materials for the process industry
(PhD Thesis;2011:19, Doctoral thesis, 2011)Process control, product quality and process design are continuously demanding new sensors and devices that can assess the rheological behavior of fluid and solid products. The need for more methods comes because of three ... -
Development of a 60 L Mixer/Vacuum Coater.
(Master thesis, 2016-08-30)The development of a 60-litre mixer/vacuum coater was the main objective of this thesis. The mixer/vacuum coaters design is based on a 1-litre prototype created by Didrik Heidal Dolva and Eirik Madland Størdal at IMT/NMBU ... -
Development of a clamp-on mechanism for an ultrasonic flow meter
(Master thesis, 2018)274 billion liters of clean, processed drinking water are lost from water distribution systems daily. In order to identify and locate leakages in water distribution networks, water utilities use time-consuming techniques ... -
Development of a user-friendly radiomics framework
(Master thesis, 2020)The goal of this thesis is to implement an easy to use, user-friendly application to help researchers in the field of radiomics and image processing to extract radiomics features. The application also includes an easy way ... -
Development of algorithm for pre-processing and prediction in capacative micromachined ultrasonic transducers
(Master thesis, 2019)The World Health Organization states that air pollution leads to 6.4 million premature deaths yearly and the number is increasing. Developing gas sensors that can measure air quality is therefore important. In this thesis, ... -
The development of an autonomous docking system for charging of the agricultural robot, Thorvald
(Master thesis, 2020)While the population growth continues at a steady pace, so does the need for increased food production. With an estimated population of nearly ten billion people within 2050, food production in agriculture has to remain ... -
Development of an inexpensive test-rig for particle sensors
(Master thesis, 2018)Air pollution is the leading environmental cause of death. Where almost all major cities in the world are breaking the pollution limits. Better tools to monitor and gather data, strengthening the decision-making basis for ... -
Development of electroluminescence imaging for quantitative image analysis of photovoltaic modules
(Master thesis, 2020)With a considerable demand for renewable energy where PV technology has a high potential for an increase in efficiency, there are continuously immense efforts to improve it. Electroluminescence is one of the promising ... -
Development of function model for hydraulic stone release system on plough
(Master thesis, 2013-08-30) -
Development of gas composition sensing based on acoustic attenuation
(Master thesis, 2021)Usage of sensing technology has increased rapidly for the last decade. Measurements of gas concentrations can are used in a wide variety of areas like medical applications, monitoring in wastewater plants and air quality ... -
Development of laboratory-rig for testing of thermoplastic composites, pressurized in supercritical CO2
(Master thesis, 2020)Utvikling av termoplast komposittmaterialeteknologier for transport og håndtering av CO2 i gass-, væske- og superkritiske faser krever nye standard testmetoder og testutstyr. Superkritisk CO2 fungerer som et godt løsemiddel ... -
Development of ROV operated emergency cutting tool for 12" VCS
(Master thesis, 2015-08-06)When Aker Solutions connects pipelines at the seabed, they use a connector called clamp connector. This clamp connector holds on to the flanged end on each pipeline end and locks them together with a separate seal in the ... -
Development of shell for next generation ultrasound probe
(Master thesis, 2019)Teknologien for ultralyd blir bedre og bedre etter hvert som elektronikken og programvare utvikler seg. En oppgradering i elektronikken krever ofte mer plass grunnet større komponenter. Denne oppgaven ser på mulighetene ...